Ultherapy 300 vs 600 vs 1000 Shots: What the Numbers Really Mean

Dr. Designer Clinic Yeongdeungpo · Updated 2026-09 · Korean original ↗

"How many shots should I get?" Nine out of ten Ultherapy consultations start with this question. When 300, 600 and 1000 are listed side by side, it is natural to wonder whether bigger is better or whether a smaller plan is pointless. Here is what the number actually means and what matters more.

1. A shot is a point, not a power level

Ultherapy focuses ultrasound energy at a fixed depth. One shot is one line of treatment, and each shot creates several tiny thermal coagulation points (TCPs) in a row. So 600 shots does not mean 600 coagulation points, and it does not mean the treatment was twice as strong as 300: the shot count is the number of lines delivered, not the power of each one. The same 600 shots can be spread thinly across the whole face or concentrated along the jawline, and that distribution, not the number itself, produces the result.

2. How 300, 600 and 1000 differ

The plans differ by the area covered, not by intensity.

The eye area is treated separately as "eye Ultherapy" with around 200 shots. The skin there is thin, so a dedicated transducer and a shallower depth are used, and it is counted apart from the face.

3. Each area needs a minimum density

Saving shots is not always a saving. Spreading a small number over a large area widens the gap between lines, lowers the density of stimulation and dilutes the result. When someone asks for "the whole face with 300 shots", we explain first that it is unlikely to meet expectations, and offer a choice: narrow the area to keep the density, or keep the area and increase the shots.

4. What decides the result more than the number

• Depth. Transducers deliver energy at 1.5, 3.0 or 4.5 mm, while the ultrasound image sees down to 8 mm. Choosing the right depth for each area, checked on the real-time image, matters more than adding shots.
• Placement. Density where the tissue actually sags. Placement and depth matter as much as the shot count.
• Genuine transducers. A transducer has a fixed shot count. We use genuine transducers, and you can check the brand and the remaining-shot counter.
• Skin condition. Thickness, fat volume and age change how much lift the same shots produce.

5. How the session goes

1. Consultation and photos, then the shot plan is drawn on your face.
2. Numbing cream for about 30 minutes.
3. Ultherapy Prime imaging to confirm depth in each area.
4. Treatment, area by area. About 45–90 minutes depending on shots.
5. Aftercare instructions. Mild redness or tenderness is possible, but you can usually go out straight away.

Who we do not recommend it for

• Pregnant or breastfeeding patients.
• Severe sagging with much loose skin, where threads or surgery are more realistic.
• Very thin faces with little fat, where the depth plan must change or another treatment is safer.
• Active infection or metal implants in the area.

Frequently asked questions

How many shots is right for me?

For one concern such as the jawline, 300. For general laxity across the face, 600. For face plus neck or dense coverage, 1000. We confirm after looking at your face.

Do more shots mean better results?

Only if the extra shots go where they are needed. Density in the right place matters more than the total.

Can leftover shots be used elsewhere?

Sometimes, if the same transducer depth suits the other area. The eye area needs its own transducer and cannot share.

Can I add the eye area?

Yes, as a separate 200-shot plan in the same session.

How long does it take?

About 45 minutes for 300 shots and up to 90 minutes for 1000, plus 30 minutes of numbing.

← All guides

This guide is general information written by Dr. Designer Clinic Yeongdeungpo and is not a substitute for a consultation. Results, downtime and suitability vary by individual and are decided after an in-person examination by the doctor.